In an electric steel plant, the furnace transformer is the piece of equipment that converts the incoming supply into something the furnace can actually melt with. It is also the unit the whole production schedule depends on, because a transformer failure stops the plant rather than slowing it.
The EAF transformer
The arc furnace transformer takes the medium voltage supply and delivers low voltage at very high current to the electrodes. The arc it sustains is what melts the scrap, and the transformer regulation determines how that arc behaves through the heat.
Its two defining duties are cyclic overload and repeated short circuit. During meltdown the furnace is driven well above its steady rating, and the electrodes contact the charge constantly, so the windings see mechanical shock as a routine event rather than an exception.
On-load tap changing is essential here. Meltdown, refining and holding each want a different secondary voltage, and the furnace cannot be stopped to change taps between them.
The ladle furnace transformer
Many plants also run a ladle furnace for secondary refining, and it needs its own transformer. A ladle furnace transformer is typically smaller than the main EAF unit and the arc is more stable, because the bath is already molten and the electrode sits in a controlled position rather than plunging into scrap.
That does not make it a simple unit. It still needs high current output and stable arc behaviour, and the temperature control it provides is what determines final steel quality, so regulation precision matters.
Requirements that follow from steel mill service
- High power rating sized against the melting cycle rather than a steady load.
- High secondary current, with conductor and busbar design to match.
- Mechanical construction verified against repeated short circuit forces.
- Impedance selected for arc stability rather than for best regulation.
- On-load tap changing with enough steps for fine control.
- Cooling sized for cyclic overload, with redundancy worth considering on large units.
- Short circuit withstand and impedance values confirmed against the plant fault level.
Harmonics and the supply connection
Arc furnaces impose harmonic distortion and voltage flicker on the supplying network, and plants operating under a connection agreement usually have limits to meet. The transformer is part of the mitigation: phase-shifted arrangements and, where required, compensation equipment on the supply side. If flicker limits apply to your installation, they belong in the enquiry because they can change the transformer specification.
Send the furnace type and capacity, the melting cycle, the primary voltage and fault level, and the secondary voltage range. See the furnace transformer and arc furnace transformer ranges, or contact us with the process details.
Related Products
Related Applications
- Transformers for Steel Industry
- Transformers for Electric Furnaces
- Transformers for Industrial Equipment
Request a Custom Quote
Need a custom transformer for your application? Send us your technical requirements and our engineering team will provide a custom solution within 24-48 hours.