Author name: Youge Transformer Engineering

The most common mistake in furnace transformer selection is starting from the kVA. Furnace duty is cyclic, heavily overloaded part […]

An arc furnace transformer feeds the most electrically hostile load in a steel plant. The arc is unstable by nature, […]

Electric furnace is a broad term. It covers equipment ranging from a small resistance heat treatment unit to an arc […]

A furnace transformer is a transformer built around one unusual condition: the secondary carries a very large current at a […]

Cooling is not an accessory on a rectifier transformer. Harmonic currents from the rectifier produce additional losses that a sinusoidal […]

A rectifier transformer differs from a conventional power transformer in one fundamental way: the load current is not sinusoidal. Several […]

A high current rectifier transformer is defined by its secondary. Where a conventional transformer is described by its voltage ratio, […]

An electrochemical plant converts DC current into a chemical reaction, and the rectifier transformer is what supplies that current. When […]

Selecting a rectifier transformer is not a matter of picking a kVA figure from a table. The rating follows from […]

The rectifier transformer does not change what a transformer is. It applies the same electromagnetic principle under conditions that make […]